Valves
AV503
- Sealing around the dosing port by needle valve makes no fluid dripping and keeps a good condition of port
- High accurate small volume of dispensing is available by minimizing capacity to the needle point edge
- New sealing structure fulfill the high durability and easy exchangeing of valve seat
Specification
| Valve Structure | Needle |
|---|---|
| Minimum Dispensing Volume | 0.04mL |
| Flow Rate (KV value) |
1.0L/min. |
| Applicable Viscosity | 1 ~ 100,000mPa･s |
| Material of Fluid Contact Part | SUS304, NBR, UHMW |
| Fluid Pressure | Maximum 490kPa |
| Connecting Port of Piping | IN. PT1/8 |
| Operating Cycle | 150cycles/min. |
| Operating Air Pressure | 392 ~ 686kPa |
| External Dimensions | (W)22 x (D)22 x (H)99.4mm |
| Weight | 100g |
