Dispensers, Desktop Robots, FA Dispensing Machines

Home > Products > Dispensers > (AD Series) AD3300C



  • Dispenses by high spec regulator.
  • Easy control by all dispensing conditions displayed in digital.
  • Equipped Air-Pressure detect function (Alarm at air-pressure out of range).
  • Memorized shot-time up to 10 pattern.
  • Equipped Shot-counter function, Interval shot function.


Air Source Max. 0.99MPa (Non-lubricated dry air)
Operating Air Pressure 20 ~ 700kPa
Shot Time Range 0.010 ~ 99.999sec. (Adjustable by 0.001sec. step)
Vacuum Function Adjustable with a dial (Digital display)
Applicable Material Viscosity Low to High
Dispensing Mode TIMED Mode: Fixed volume dispensing
STEADY Mode: Continuous dispensing
Start Signal Foot switch or non-voltage normal open input
(Voltage input changeable by internal dip switch)
Operation Speed 450cycles/min.
Operation Circumstance +5 ~ +40 (non-condensing)
Power Supply AC85 ~ 264V (50/60Hz)
Power Consumption 7.5VA
External Dimensions (W)190 x (D)130 x (H)88mm (Body)
Weight 1.9kg

Low pressure AD3300CL model (Operating Air Pressure 10~200kPa) is available.

Standard Accessories

CC4P 4pin metal connector / AC adapter 1
Home > Products > Dispensers > (AD Series) AD3300C

Iwashita Engineering, Inc. All Rights Reserved.