Dispensers
ACCURA 9
- Sense an internal pressure of the barrel and assure stable shot volume in order to compensate vacuum and shot pressure automatically.
- No necessary to entry the data except default setting by self-compensation.
- Built in empty level alarm device and dispense count setting.
- Store 100-channel memory and apply various dispensing.
- Digital control for vacuum pressure with a special electro-pneumatic regulator.
- RS232C port is equipped to connect with FA system.
Specification
| Air Source | Max. 735kPa Non-lubricated dry air |
|---|---|
| Operating Air Pressure | 30 ~ 490kPa |
| Shot Time Range | 0.030 ~ 99.999sec. |
| Vacuum Function | Equipped |
| Applicable Material Viscosity | Low to High |
| Dispensing Mode | AUTO Mode: Fixed volume dispensing STEADY Mode: Continuous dispensing |
| Channel Memory | Each 100CH (AUTO Mode, STEADY Mode) |
| Start Signal | No voltage N.O. contacts |
| Operation Speed | 600cycles/min. |
| Operation Circumstance | +5℃ ~ +40℃, non-condensing |
| Power Supply | AC85 ~ 264V (50/60Hz) |
| Power Consumption | 12VA maximum |
| External Dimensions | (W)280 x (D)300 x (H)100mm (Body) |
| Weight | 8kg |
Low pressure ACCURA 9L model (Operating Air Pressure 30kPa~196kPa) is available.
Standard Accessories
| D sub-connector plug with 37P | 2 |
|---|---|
| D sub-connector plug with 9P | 1 |
| Metal outlet plug with 4P | 1 |
| Air coupler | 1 |
| Power cable set | 1 |
Adaptor assembly for the higher precision dispensing is available.